| Ab - Cage-Cone Frontface Clearance | 0.11 in |
| Design Units | Imperial |
| R - Cone Backface To Clear Radius3 | 0.14 in |
| Cg - Geometry Factor | 0.0993 |
| d | 2.5000 in |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 | 32400 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 | 15100 lbf |
| Cage Type | Stamped Steel |
| da - Cone Frontface Backing Diameter | 3.23 in |
| Series | H715300 |
| C1 - Dynamic Radial Rating (1 million revolutions)6 | 71700 lbf |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 | 125000 lbf |
| C0 - Static Radial Rating | 91000 lbf |
| db - Cone Backface Backing Diameter | 3.46 in |
| a - Effective Center Location4 | -0.34 in |
| C90 - Dynamic Radial Rating (90 million revolutions)5 | 18600 lbf |
| Cone Part Number | H715336 |
| K - Factor8 | 1.24 |
| Aa - Cage-Cone Backface Clearance | 0.14 in |
| B - Cone Width | 1.8125 in |
| 4SRS5GNC1+[22-220/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Bore Diameter (mm):120; Bearing number:120RF02; Outer Diameter (mm):198; F:137 mm; D:215 mm; B:40 mm; C:40 mm; r max:2 mm; E:198 mm; d:120 mm; |
| 4SRS5GN+[22-220/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | d:35 mm; Angle (α):25 °; B:14 mm; Bearing number:7007UADG/GNP42; Bore Diameter (mm):35; D:62 mm; Width (mm):14; C:14 mm; Size (mm):35x62x14; Outer Diameter (mm):62; |
| 4SRS5GNUUC1+[22-220/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Limiting Speed - Grease:3,300 rpm; Axial Load Factor Y1:1.98; Constant e:0.34; Da (max):155 mm; Radial Clearance:0.060 to 0.100 mm; D:165 mm; Groove Width A:9 mm; Hole Diameter (do):5 mm; Limiting Speed - Oil:4,500 rpm; Static Load Rating:538,000 N; d:100 mm; Nr. of Holes:4; Axial Load Factor Y0:1.9 |
| 4SRS5GNUUC1+[22-220/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Bearing number:RAX 520; Static load rating axial (C0):54 kN; D1:35 mm; Outer Diameter (mm):30; Static load rating radial (C0):23,7 kN; Dynamic load rating axial (C):22 kN; Bore Diameter (mm):20; C:26 mm; Eb:22 mm; Width (mm):26; C1:8 mm; Ea:31,6 mm; Dynamic load rating radial (C):14,8 kN; Fw:20 mm; |
| 4SRS5GNUU+[22-220/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Width (mm):44; r1 min.:0,3 mm; U:80 mm; r min.:1 mm; Outer Diameter (mm):90; Size (mm):60x90x44; Bearing number:60FSF90; Bore Diameter (mm):60; Basic dynamic load rating (C):197 kN; B:44 mm; C:36 mm; Weight:1,1 Kg; D:90 mm; Angle:7 °; d:60 mm; d1:66,8 mm; |
| 4SRS5GN+[22-220/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Bearing Weight:0.080 Kg; da - Inner Ring Backing Diameter:39.500 mm; r - Outer Ring To Clear Radius3:0.6 mm; Ball Type:Ceramic; Limiting Speed (Oil):73200 rpm; Limiting Speed (Grease):36600 rpm; D:55.000 mm; do - Ball Diameter:3.968750 mm; C0 - Static Radial Rating:2850 N; Contact Angle:15 º; Bearin |
| 4SRS5GNC1+[22-220/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Ball diameter Dw:8.731 mm; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor - Y1:0.92; B:22 mm; d:120 mm; ra - max.:1 mm; Calculation factor (single, tandem) X2:0.41; Calculation factor e:0.68; da min.:126 mm; Preload class C GC:930 N; Preload class A:210 N/micron; Calcula |
| 4SRS5GNUU+[22-220/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Bearing number:UCP313; d:65 mm; A:340 mm; S1:25 mm; H2:33 mm; Bolt (G):M20; E:260 mm; F:30 mm; B:75 mm; P:90 mm; H1:90 mm; Bore Diameter (mm):65; S2:38 mm; H:176 mm; |