| 10-25 1355/0-0306 IMO Slewing Ring Bearings | d:45 mm; r:1 mm; Size (mm):45x75x20; Basic dynamic load rating (C90):15,9; Width (mm):20; Basic dynamic load rating (C1):61,5 kN; Factor (K):1,49; Ab:2,1 mm; Aa:0,6 mm; Bearing number:X32009X/Y32009X; Calculation factor (e):0,39; D:75 mm; C:15,5 mm; Outer Diameter (mm):75; a -:3,3 mm; Weight:0,35 Kg |
| 11-25 1455/1-0317 IMO Slewing Ring Bearings | Bearing number:395S/394A; Bore Diameter (mm):66,675; B:21,996 mm; D:110 mm; a:0,8 mm; Width (mm):22; T:22 mm; Size (mm):66.675x110x22; C:18,824 mm; Outer Diameter (mm):110; d:66,675 mm; |
| 11-25 1355/1-0316 IMO Slewing Ring Bearings | Dimension D Max:6.00 in; Weight:9.0 lb; C0 - Static Load:22400 lb; Float:0.050 in; Dimension F:6.88 in; Housing Style:Two-Bolt Pillow Bloc; Pre Install Clearance Max:0.0018 in; Full Timken Part Number:QMP08J107SB; Oil Lubrication - T Seal:4500 rpm; Dimension S:2.75 in; Dimension M:1.75 in; e - Geome |
| 11-25 1255/1-0315 IMO Slewing Ring Bearings | D:134.983 mm; Bore Diameter (mm):59.987; C:21.948 mm; Outer Diameter (mm):134.983; Size (mm):59.987x134.983x33.44; Weight:2,173 Kg; Bearing number:HM911244R/HM911216; r1 min.:3.6 mm; B:30.925 mm; d:59.987 mm; r2 min.:3.6 mm; Width (mm):33.449; Calculation factor (Y0):0.40; (Grease) Lubrication Speed |
| 12-25 1355/1-0326 IMO Slewing Ring Bearings | Size (mm):40x68x15; B:15 mm; Bore Diameter (mm):40; Basic static load rating (C0):5,65 kN; C:15 mm; (Grease) Lubrication Speed:19 000 r/min; r1 min.:0,6 mm; d:40 mm; Weight:0,189 Kg; Bearing number:3NCHAR008; Width (mm):15; D:68 mm; Outer Diameter (mm):68; Angle (α):30 °; Basic dynamic loa |
| 12-25 1455/1-0327 IMO Slewing Ring Bearings | Static load, C0:320 kN; rs min:3.56 mm; Product Group:B04334; Characteristic outer ring frequency, BPF0:5.7 Hz; Width (mm):52,388; B:52,388 mm; r1a max:3.3 mm; Characteristic inner ring frequency, BPFI:8.3 Hz; D:127 mm; Y2:2.01; a:31.2 mm; Rating life coefficient, A2:1.4; d:53,975 mm; Category:Beari |
| 10-25 1255/0-0305 IMO Slewing Ring Bearings | Jmax:215 mm; L:255 mm; Bolt Qty:2; H1:70.0 mm; G:M16; Bearing:22211; J:210.00 mm; Jmin:205 mm; Max Grease Speed:4700; UPC Code:999999999; N1:24.00 mm; Seal Type:V-ring; N:18 mm; A:95.00 mm; Shaft Diameter da:55 mm; C1 Dynamic Load Rating:140; Shaft Diameter db:65 mm; Housing:SNT 211; Locating Rings |