0.748 Inch | 19 Millimeter x 1.063 Inch | 27 Millimeter x 0.787 Inch | 20 Millimeter IKO TAF192720 Needle Non Thrust Roller Bearings

Offer High Quality Brand 0.748 Inch | 19 Millimeter x 1.063 Inch | 27 Millimeter x 0.787 Inch | 20 Millimeter IKO TAF192720 Needle Non Thrust Roller Bearings .Contact Us 0.748 Inch | 19 Millimeter x 1.063 Inch | 27 Millimeter x 0.787 Inch | 20 Millimeter Online to Get Best Quote. Guangzhou Ouster Hydraulic Co., Ltd.

What is TAF192720 bearing cross reference?

Brand Name:IKO
Model Number:TAF192720
Series:34000
Cone Part Number:34301
Design Units:Imperial
Cage Type:Stamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:40000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:10400 lbf
d:3 in
B - Cone Width:0.9060 in
PDF TAF192720

Product Details

Series34000
Cone Part Number34301
Design UnitsImperial
Cage TypeStamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)140000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)210400 lbf
d3 in
B - Cone Width0.9060 in
R - Cone Backface To Clear Radius30.14 in
da - Cone Frontface Backing Diameter3.27 in
db - Cone Backface Backing Diameter3.5 in
Ab - Cage-Cone Frontface Clearance0.1 in
Aa - Cage-Cone Backface Clearance0.09 in
a - Effective Center Location40.06 in
C90 - Dynamic Radial Rating (90 million revolutions)55960 lbf
C1 - Dynamic Radial Rating (1 million revolutions)623000 lbf
C0 - Static Radial Rating30600 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)74600 lbf
K - Factor81.3
G1 - Heat Generation Factor (Roller-Raceway)69.3
G2 - Heat Generation Factor (Rib-Roller End)27
Cg - Geometry Factor0.109
View more

Company Profile

Worktime 9:00-18:00(BeiJing time)
Phone 86-15153696688
View more

Related News

  • Are Shake Junt bearings any good?!?! [Archive] - SkateboardThey are really good but i reccomend taking off the shields because they don't protect the bearing from dirt and they actually make them roll  Shake Junt OG's ABEC 7 Bearings...
  • Can you use wd40 to clean bearings? | HomeXYou should never use WD40 to clean skate bearings. This is a product specifically designed to remove rust and dirt, not like a lubricant or roller detergent Can You Use WD40 To Clean Skateboard BearingsYou...
  • Diagnosing a Clutch Bearing or Bushing Noise | Know YourLearn how to diagnose a clutch bearing or bushing noise from Know Your Parts. Next release the clutch with the transmission in first gear. Noise under this Diagnosing clutch and manual...
  • Recommended Products

    All Products Contact Now