IKO CF10-1VBUUR Cam Follower and Track Roller - Stud Type

Browse 24.2 mm s1 IKO CF10-1VBUUR Cam Follower and Track Roller - Stud Type Categories in the Manufacturers Online Free. 21.4 mm B including 3.7 Nm Recommended tightening torque for set screw IKO Bearing. Guangzhou Ouster Hydraulic Co., Ltd.

What is CF10-1VBUUR bearing cross reference´╝č

Brand Name:IKO
Model Number:CF10-1VBUUR
Series:29600
Cone Part Number:29688
Design Units:Imperial
Cage Type:Stamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:43300 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:11200 lbf
d:2.9062 in
B - Cone Width:1.0000 in
PDF CF10-1VBUUR

Product Details

Series29600
Cone Part Number29688
Design UnitsImperial
Cage TypeStamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)143300 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)211200 lbf
d2.9062 in
B - Cone Width1.0000 in
R - Cone Backface To Clear Radius30.06 in
da - Cone Frontface Backing Diameter3.15 in
db - Cone Backface Backing Diameter3.27 in
Ab - Cage-Cone Frontface Clearance0.08 in
Aa - Cage-Cone Backface Clearance0.08 in
a - Effective Center Location40.04 in
C90 - Dynamic Radial Rating (90 million revolutions)56440 lbf
C1 - Dynamic Radial Rating (1 million revolutions)624800 lbf
C0 - Static Radial Rating37200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)75370 lbf
K - Factor81.2
G1 - Heat Generation Factor (Roller-Raceway)77.7
G2 - Heat Generation Factor (Rib-Roller End)43.3
Cg - Geometry Factor0.117
View more

Company Profile

Worktime 9:00-18:00(BeiJing time)
Phone 86-15153696688
View more

Related News

  • Are Shake Junt bearings any good?!?! [Archive] - SkateboardThey are really good but i reccomend taking off the shields because they don't protect the bearing from dirt and they actually make them roll  Shake Junt OG's ABEC 7 Bearings...
  • Can you use wd40 to clean bearings? | HomeXYou should never use WD40 to clean skate bearings. This is a product specifically designed to remove rust and dirt, not like a lubricant or roller detergent Can You Use WD40 To Clean Skateboard BearingsYou...
  • Diagnosing a Clutch Bearing or Bushing Noise | Know YourLearn how to diagnose a clutch bearing or bushing noise from Know Your Parts. Next release the clutch with the transmission in first gear. Noise under this Diagnosing clutch and manual...
  • Recommended Products

    All Products Contact Now